Friday 1 March 2013

The boards have landed





I didn't get an exclusive this time but here is a partially completed DATV-Express Rev2 PCB. I am looking forward to getting the first completed unit to test software on. Exciting times!
Posted by at

4 comments:

  1. Mike1 March 2013 at 21:18

    Nice! Hand placing fine pitch SMT is always a fun challenge.

    K
    Mike - KM7MH

    ReplyDelete
  2. G4GUO1 March 2013 at 22:16

    Art has the FPGA to do next. The trickiest part is the PLL/IQ modulator chip right side. It has to be soldered on the underside as well.

    ReplyDelete
  3. KM7MH1 March 2013 at 22:31

    Fortunately a relatively low parts count board. A testament to the power of software.

    I used to hand solder and use a heat gun for reflow on the central paddles. Switched to single board stencil, solder pasting and using one of these:
    http://www.madelltech.com/images/MD-2012.JPG



    ReplyDelete
  4. G4GUO1 March 2013 at 22:49

    I thought of buying one of those as they look pretty good value for money. Trouble is I don't make that many boards. However my experience with DATV-Express has given me more enthusiasm to try a complex board myself.

    ReplyDelete

Subscribe to: Post Comments (Atom)